Iridium gain boost needed
Moderator: Dave Mudgett
-
Jim Hoke
- Posts: 400
- Joined: 22 Dec 2005 1:01 am
- Location: Tennessee, USA
Iridium gain boost needed
I'm loving the sounds I get out of my Iridium for recording but the level is pretty low. I've heard of various signal boosters for this but can't remember what they are. What is anybody using for this? Thanks!
-
Stew Crookes
- Posts: 146
- Joined: 30 Mar 2023 6:44 am
- Location: Paris, France
Re: Iridium gain boost needed
What are you plugging it into?
It should output an appropriate level for an instrument level / DI input with nothing else required in between…
It should output an appropriate level for an instrument level / DI input with nothing else required in between…
Music mixer, producer and pedal steel guitarist
stewcrookes.com
stewcrookes.com
-
Mitch Adelman
- Posts: 310
- Joined: 17 Jul 2006 12:01 am
- Location: Pennsylvania, USA
Re: Iridium gain boost needed
Idk if you tried this but this move can boost it 3db which helped me.
Press and hold the ON footswitch. Once both LEDs flash, release the footswitch.
Turn the LEVEL knob to adjust the output level. FAV LED indicates status.
Sweeps from -20 dB (GREEN) to +3 dB (AMBER). LED turns RED when there is no boost or cut of the
output level (the default), near the 12 o’clock position. Press the ON or FAV footswitch to exit and store the
Level Trim setting.
Press and hold the ON footswitch. Once both LEDs flash, release the footswitch.
Turn the LEVEL knob to adjust the output level. FAV LED indicates status.
Sweeps from -20 dB (GREEN) to +3 dB (AMBER). LED turns RED when there is no boost or cut of the
output level (the default), near the 12 o’clock position. Press the ON or FAV footswitch to exit and store the
Level Trim setting.