Travis Toy Quilter amp.

Dennis Ellerbee · Post by **Dennis Ellerbee** » 30 Jun 2020 5:14 pm

Bought this amp. Plugged it in and wow. It is light weight and the 12 inch speaker kicks butt. Best sounding amp I have heard in a long while. Plugged in my Benado Steel Dream pedal and it is wonderful. Still playing with the amp settings, but started with the Travis Toy settings he put on the forum, and adjusted from there. You should check this out. I am very happy Travis put this together.

Larry Behm · Post by **Larry Behm** » 7 Jul 2020 8:55 pm

I also got the 202 and the TT 15, now this is clean, wow!

Micheal Harvey · Post by **Micheal Harvey** » 10 Jul 2020 10:47 am

How does this compare to the Telonic's 15

Dennis Ellerbee · Post by **Dennis Ellerbee** » 11 Jul 2020 5:29 am

I haven’t used a Telonics Amp, but I can tell you the TT Quilter amp is hard to beat, and the good thing is if you want to use a 15” cabinet you can remove the amp section and use it with the 15 cabinet. Sounds great either way.

Kenneth Kotsay · Post by **Kenneth Kotsay** » 7 Aug 2020 8:25 am

Has anyone tried the Steelaire version from Quilter.
How did you like it?

Ken

Steve Hinson · Post by **Steve Hinson** » 11 Aug 2020 6:55 am

I love my TB-202,which is the amp section of the TT amp...

I prefer the 15"speaker,so I use the Eminence EPS speaker in a Marrs cab...

I'm very happy with it.

SH

Roger Crawford · Post by **Roger Crawford** » 11 Aug 2020 9:21 am

So, Dennis, where have you landed on settings?

Johnny Cox · Post by **Johnny Cox** » 11 Aug 2020 7:54 pm

I love mine. I have the TT12 combo with a extra TT12 cab. I also use the TB202 with a 15"JBL for the more vintage 60s sound. They all sound great.

Roy Peterman · Post by **Roy Peterman** » 12 Aug 2020 5:38 am

I bought a TB202 from my old pal Tommy Detamore, built a cabinet and put an Eminence EPS speaker in it. I've used it on some gigs and several sessions, and it has been great. It also is much easier on the back! By the way, Tommy was a great guy to deal with.

Jack Stoner · Post by **Jack Stoner** » 15 Aug 2020 6:44 am

As I previously posted I couldn't get a sound I liked with the Steelaire and a Franklin D-10 steel (with Lawrence 710 pickups). Same way with the Franklin and a Quilter amp head and several different speakers including a Telonics TSNEO-12.

I now have a GFI Ultra D-10 with Lawrence 710 pickups. I recently (Thursday) picked up a Quilter Travis Toy model amp. Bingo! within 2 minutes I found "my" sound. With my downsizing, the Quilter TT fits in as its 27lbs compared to 44 for a stock NV112 (or 10lbs lighter than my customized NV112).

Travis Toy · Post by **Travis Toy** » 17 Aug 2020 7:38 am

Glad everybody is enjoying the combo. It certainly works incredibly for me.

-t

Dennis Detweiler · Post by **Dennis Detweiler** » 18 Aug 2020 4:45 am

Is the 202 and the TT amp the same tone stack? Only difference is the power output?

Jack Stoner · Post by **Jack Stoner** » 18 Aug 2020 5:33 am

The Travis Toy model uses a stock 202 amp.

Micheal Harvey · Post by **Micheal Harvey** » 18 Aug 2020 12:24 pm

Has anyone ever tried this with a steelaire Pro?

Micheal Harvey · Post by **Micheal Harvey** » 19 Aug 2020 10:20 am

Has anyone tried the TT15 compared to the Telonics? What are your thoughts if any?

Landon Johnson · Post by **Landon Johnson** » 25 Jul 2021 6:25 pm

This was the most recent thread I've found concerning the TT-12... I just got one, really like it but I have a question...

I will be switching back and forth between steel and 6 string and will therefore have the 202 on a tray mounted on my steel legs. I'll need to run a cable from the 202 to the cab... the one that came with it is too short (not its intended purpose) and I am looking for recommendations for a longer cable --- 10 - 12 feet ought to do it. Concerned about noise/loss of fidelity.

Thoughts? Thank you IA

Travis Toy · Post by **Travis Toy** » 25 Jul 2021 6:30 pm

Landon Johnson wrote:This was the most recent thread I've found concerning the TT-12... I just got one, really like it but I have a question...

I will be switching back and forth between steel and 6 string and will therefore have the 202 on a tray mounted on my steel legs. I'll need to run a cable from the 202 to the cab... the one that came with it is too short (not its intended purpose) and I am looking for recommendations for a longer cable --- 10 - 12 feet ought to do it. Concerned about noise/loss of fidelity.

Thoughts? Thank you IA

Landon, this is my favorite speaker cable by a large margin. Itâ€™s all I use live and in the studio. They sell a variety of lengths.

https://www.daddario.com/products/acces ... feet-6857/

Landon Johnson · Post by **Landon Johnson** » 25 Jul 2021 7:31 pm

Well alrighty then! Order'd! Thank you very much

Bobby Hearn · Post by **Bobby Hearn** » 7 Sep 2021 6:28 am

Do they offer right angled ends on these cables?

Travis Toy · Post by **Travis Toy** » 7 Sep 2021 7:06 am

Bobby Hearn wrote:Do they offer right angled ends on these cables?

They donâ€™t.

Bobby Hearn · Post by **Bobby Hearn** » 7 Sep 2021 10:45 am

Thanks Travis. I don’t reckon that’s no big deal.

Jeff Donnell · Post by **Jeff Donnell** » 24 Sep 2025 10:58 am

I’ve found a great sound using an Echoplex and an Xotic EP Pedal with my Quilter SteelAire
Echoplex Sustain 12:00
Volume 10:00
Delay 9:00
Xotic EP 9:00-10:00
I just bought a TT 202 Combo from here on the Forum last Friday. Just got here today. Looking forward to trying it out.

The Steel Guitar Forum

Travis Toy Quilter amp.

Travis Toy Quilter amp.

Travis Toy 15

Travis Toy

Tt202

Tt 15

Reviving an old thread...

Re: Reviving an old thread...

Re: Travis Toy Quilter amp.