Stringmaster body swap?

Lap steels, resonators, multi-neck consoles and acoustic steel guitars

Moderator: Brad Bechtel

Jim Rossen
Posts: 538
Joined: 7 Apr 2012 8:11 pm
Location: Iowa, USA
State/Province: Iowa
Country: United States

Stringmaster body swap?

Post by Jim Rossen »

I am thinking about swapping all the original parts from my poorly refinished 24.5 in scale Stringmaster D8 to a 22.5 in scale body (I prefer this scale length). The 24.5 in guitar looks to be late 50's and the 22.5 in body from the 60's. Will this require modification of the target body, or pose other challenges?
Also, is there a difference in the body of a Stringmaster D8 compared to a D6?
Thanks
Jim
User avatar
Michael Johnstone
Posts: 3863
Joined: 29 Oct 1998 1:01 am
Location: Sylmar,Ca. USA
State/Province: -
Country: United States

Post by Michael Johnstone »

Everything's the same but the fretboard. They're not interchangeable due to the different scale lengths.
User avatar
Bill Sinclair
Posts: 1646
Joined: 23 Apr 2014 7:39 am
Location: Waynesboro, PA, USA
State/Province: -
Country: United States

Post by Bill Sinclair »

Michael Johnstone wrote:Everything's the same but the fretboard. They're not interchangeable due to the different scale lengths.
Yup. The early 26" long scale guitars are a different story though. Nothing but the diamonds and maybe the nut and jack are interchangeable with the 24.5" and 22.5" guitars.

Here's a thread to answer your second question:
viewtopic.php?t=315708&highlight=stringmaster
Jim Rossen
Posts: 538
Joined: 7 Apr 2012 8:11 pm
Location: Iowa, USA
State/Province: Iowa
Country: United States

Post by Jim Rossen »

Thanks!
Jim