Tim Harr's Kemper Profiles - Updated with Matchbro Profile

Tim Harr · Post by **Tim Harr** » 1 Nov 2023 10:41 am

I use my Kemper Profiler for pedal steel, electric guitar, acoustic guitar, and Dobro. Sometimes with and sometimes without any cab on stage (when on IEM).

If anyone is interested in my profiles, I will be glad to share. Send me your email in this thread.

Chris Grigsby · Post by **Chris Grigsby** » 1 Nov 2023 11:17 am

Hey Tim, yes, please email me at proaudio529@mac.com - do you have the actual LW '89 amp and, if so, how convincing is the Kemper?

Thanks again,
Chris

Tim Harr · Post by **Tim Harr** » 1 Nov 2023 11:20 am

Yes. I own the LW 89 PF. 100 W head and PF 350 12" cab.

Very convincing. Pretty incredible, actually. I'll send the performances. Just drag and drop them into your KPA Rig Manager.

Tim

Niklas Widen · Post by **Niklas Widen** » 1 Nov 2023 1:43 pm

Hi Tim,

I would also like to try your LW 89 profiles.

nickewiden@gmail.com

Thanks!
Nicke

Edward Dixon · Post by **Edward Dixon** » 2 Nov 2023 5:48 am

Tim,

Thanks for your generous offer.
dixonstudios@gmail.com

Jim Fogarty · Post by **Jim Fogarty** » 2 Nov 2023 5:12 pm

Hey Tim.....sorry to pile on, but if you're still up for it, I'd love to try your performances.

jfog10@comcast.net

Thanks!

Ole Dantoft · Post by **Ole Dantoft** » 3 Nov 2023 2:20 pm

Hi Tim,

I'd also love to try your performances, as I've tried several and while they all work, they just don't quite "do it" for me.

olesteel@gmail.com

Thank in advance!

Ole

Tony Dingus · Post by **Tony Dingus** » 7 Nov 2023 6:26 pm

Tim, I would like to try your profiles.

docsdobro@yahoo.com

Thank you, Tony

Tim Pillow · Post by **Tim Pillow** » 9 Nov 2023 7:29 pm

I’m definately interested in checking out this profile
tpillow73@gmail.com

Chris Grigsby · Post by **Chris Grigsby** » 10 Nov 2023 8:56 am

FYI, I have a Kemper Profiler Head and matching Powered Kemper Kabinet for sale in the classifieds for a great deal if you know anyone looking. I ended up getting the Powered Head and Passive Kabinet because it's one less power cable. I'm honestly floored at how great this thing sounds!

Thanks for the profiles! Has anyone tried the Eminence IRs for the Paul Franklin and Travis Toy speakers?

Best,
Chris

Tim Pillow · Post by **Tim Pillow** » 10 Nov 2023 10:50 am

I have both IR’s, they are good.

Tim Pillow · Post by **Tim Pillow** » 10 Nov 2023 10:53 am

Chris Grigsby wrote:FYI, I have a Kemper Profiler Head and matching Powered Kemper Kabinet for sale in the classifieds for a great deal if you know anyone looking. I ended up getting the Powered Head and Passive Kabinet because it's one less power cable. I'm honestly floored at how great this thing sounds!

Thanks for the profiles! Has anyone tried the Eminence IRs for the Paul Franklin and Travis Toy speakers?

Best,
Chris

I’m looking for a power head unit only. I already have a quilter cabinet with the PF350 speaker I’m going to use with it

Jerry Touval · Post by **Jerry Touval** » 10 Nov 2023 11:48 am

Hi Tim - I'm also interested in trying out your Kemper profiles. Email is jtouval@aol.com. Thanks!

Rick Bolanos · Post by **Rick Bolanos** » 19 Nov 2023 8:49 pm

Hey Tim, or anybody else Tim has shared them with...

I'm just getting started on PSG and use my Kemper for Bass and a little guitar. I'd love to checkout some of your PSG profiles if you don't mind sharing and would be more than willing to swap some over to you from my collection. I have quite the selection for bass related stuff (over 30k profiles) of just about every preamp/DI/amplifier I could think of.

Bolanosrick@gmail.com

Tim Harr · Post by **Tim Harr** » 1 Dec 2023 12:43 pm

Any feedback on the Performances I have sent to number of you? I am just curious. They really work well for me on both the stage and in my home studio.

Jerry Touval · Post by **Jerry Touval** » 5 Dec 2023 1:01 pm

Hi Tim – Thanks for sending the performances. So far I’ve been stuck on the Pedal Steel performance and haven’t moved on to the other two yet. I’ve especially liked the #2 rig in that performance. Did a little tweaking to add a different compressor for additional sustain and put in a Micro Pitch chorus on it. I haven’t tried recording with it yet but that will come.

At first I thought the Dirty Lap Steel was a bit too gritty for my taste, but its grown on me.

Should mention that so far I’ve been using it with my humbucker lap steel. Will move on to trying it soon on my pedal steel. Problem with the Kemper is that when I find a rig I like, it takes a while before I move along to another. I’ll try out the Clean Tele and Overdrive Guitar performance in the near future.

Jerry

Chris Grigsby · Post by **Chris Grigsby** » 9 Dec 2023 9:01 am

Hey Tim, the Performance profiles sound great to my ear! Out of curiosity, have you tried making a "liquid" profile of your LW?

Anyone know where I can find profiles for Milkman?

Thanks!

Theodore Wells · Post by **Theodore Wells** » 26 Dec 2023 11:49 pm

Hi Tim. I’d love to check out your Kemper profiles. Many thanks.
twells@silverstar.com

Tal Herbsman · Post by **Tal Herbsman** » 27 Dec 2023 9:30 am

I don't own a Kemper, my buddy made a profile of my pedal steel mini with JBL k-120 about 100 years ago. I can't vouch for it, but here you go:

https://www.dropbox.com/scl/fi/xbzmtoqo ... y5w8q&dl=0

Tim Pillow · Post by **Tim Pillow** » 27 Dec 2023 4:43 pm

So I have some profiles of the Mesa boogie studio preamp. I bought them a couple years ago. These are professional profiles of this preamp.

Guy Cundell · Post by **Guy Cundell** » 28 Dec 2023 5:22 pm

Tim, if this is still going, I would love to try your profiles. I am at guy.cundell@gmail.com and would be happy to provide feedback. I am using a bunch of different things for lap steel but haven't settled on a favourite for PSG.

Terry Skaggs · Post by **Terry Skaggs** » 6 Jan 2024 10:54 am

Tim if possible would be great to get your performances...and profiles if possible....Thanks Terry

Tim Harr · Post by **Tim Harr** » 8 Jan 2024 5:37 pm

No problem sharing my Kemper files... If you would like to try them, I will need your email address. Thanks!

Bill McCloskey · Post by **Bill McCloskey** » 24 Jan 2024 8:29 pm

Many thanks to Tim for sending me his performances. He was more patient with an old man than I deserved. Thanks again Tim.

Tim Harr · Post by **Tim Harr** » 24 Jan 2024 8:36 pm

Bill - you are quite welcome. Be in touch if I can ever help you with your Kemper!