BL 705 Pick Up

[Bob Jennings]

I have this Pick Up and would like to install it in my Steel replacing the original one., I'm not real knowledgeable on electronics so I need some guidance. There are two wires taped together--A White Wire and Green Wire; There are two more wires--A Red one and a Ground. What I need to know is how to connect these wires. Any Help will be appreciated.

Bob Jennings

[Marty Nemanick]

Black and bare are ground, red is the hot lead. White and green solder together and don’t hook to anything. Put some electrical tape or better yet, some heat shrink over them so they do not short out.

[Bob Jennings]

Marty,

Thank you for the Info--I got it and am ready to install the Pickup.

Thanks again,

Bob J.

[Bob Jennings]

Marty,

I got the BL 705 installed, new strings on and sound is great--Thanks again for the info on the wiring.

I now know enough about connecting a pick-up to be Dangerous.....

Bob J.

[Marty Nemanick]

You are more than welcome Bob, glad I could help you out! Those are great pickups.